DEWALT DWFP55130 Quiet Trim Compressor review
DEWALT's quiet trim compressor: a 2.5-gallon hot-dog tank pumped to 200 PSI, 3.0 SCFM at 90 PSI and 71.5 dBA under a recognized test standard. At 71.5 dB it is about as loud as a vacuum cleaner.
Affiliate link · we may earn a commission · Affiliate disclosure
How loud is it?
- DEWALT DWFP55130 Quiet Trim Compressor71.5 dB
Manufacturer rating (dBA, ISO 3744). Brands measure at different distances, so treat 1–2 dB differences as a tie. Why dB ratings vary.
Full specifications
| Noise rating | 71.5 dB |
|---|---|
| Noise source | Manufacturer rating (dBA, ISO 3744) |
| CFM at 90 PSI | 3 |
| CFM at 40 PSI | 4 |
| Max PSI | 200 |
| Tank | 2.5 gal |
| Horsepower | 1.1 HP |
| Pump | Oil-free |
| Stages | — |
| Power | 120V outlet |
| Duty cycle | — |
| Weight | 36 lb |
| Price band | $150–$300 (checked October 18, 2026) |
A dash means the manufacturer doesn't publish that figure. We never estimate one.
Our take
Most quiet compressors run at low pressure. DEWALT took the other route with the DWFP55130: a 200 PSI cut-out squeezes more usable air into a 2.5-gallon tank, so you get more shots between cycles from a small, light machine.
DEWALT rates it at 71.5 dBA under ISO 3744, a standardized measurement that many quiet-compressor brands do not cite. That is louder than the 60 dB California Air Tools and Makita models, but noticeably quieter than a typical pancake.
With 3.0 SCFM at 90 PSI it handles trim and finish nailing comfortably and can keep up with light framing. Weight is about 36 lb.
Pros
- 200 PSI max packs a lot of air into a small tank
- Noise rated under ISO 3744
- 3.0 SCFM at 90 PSI
Cons
- Louder than the 60 dB quiet models
- Hot-dog tank is less stable than a pancake
What it can run
With a 30% safety margin, 3 CFM at 90 PSI comfortably covers these tools from our list (nailers assumed at 30 shots a minute):
- Metabo HPT NT50AE2 18-Gauge Brad Nailer (0.025 cu ft per shot)
Who it's for, and who should skip it
Best for: High-pressure trim compressor from a major tool brand.
Buy it if: you want noticeably less noise than a typical 80 dB compressor; your main jobs are nailing, inflation and blow-off; you want a pump with no oil to change; you move it around often (about 36 lb).
Skip it if: you plan to run impact wrenches, sanders or spray guns for long.
How it compares in its class
- Ranked #12 of 12 in best quiet air compressors.
- Quieter than 0 of the 11 other rated models in that list (it is one of the louder options).
- 3 CFM at 90 PSI against a class median of 2.3 CFM, so above average airflow for the class.
- Price band $150–$300; see every spec side by side in the comparison table.
Ownership tips
- Drain the tank after each use (daily on a shop compressor) to stop rust from the inside.
- The pump is oil-free, so there's no oil to change; keep the intake filter clean instead.
- Plug it straight into a wall outlet and use a longer air hose instead of a long, thin extension cord.
- Test the safety relief valve now and then by pulling its ring briefly, and never adjust or plug it.
General guidance; always follow the owner's manual. More in our maintenance checklist.
DEWALT DWFP55130 Quiet Trim Compressor: quick answers
How loud is the DEWALT DWFP55130 Quiet Trim Compressor?
It is rated at 71.5 dB (manufacturer rating (dba, iso 3744)), which is about as loud as a vacuum cleaner.
What can the DEWALT DWFP55130 Quiet Trim Compressor run?
With a 30% safety margin it covers Metabo HPT NT50AE2 18-Gauge Brad Nailer from our tool list, based on 3 CFM at 90 PSI.
Is the DEWALT DWFP55130 Quiet Trim Compressor oil-free?
Yes. The pump is oil-free, so there's no oil to check or change.
What power does the DEWALT DWFP55130 Quiet Trim Compressor need?
It runs from a standard 120V household outlet. For larger units, a dedicated 20A circuit is best; avoid long, thin extension cords.
Spec sources
Where each figure on this page comes from (checked October 18, 2026). We don't present manufacturer figures as our own measurements.
- thepowertoolstore.com: noise, weight
- directools.com: CFM @ 90 PSI, CFM @ 40 PSI, tank, pump type
- Amazon product listing: max PSI
- shelllumber.com: horsepower
Alternatives to consider
California Air Tools 8010A
60 dB · 2.2 CFM @ 90 PSI · $150–$300
Quiet home garage with more stored air
Makita MAC320Q Quiet Series
60 dB · 2.6 CFM @ 90 PSI · $300–$600
The most airflow you can get at 60 dB
Appears in: Best quiet air compressors · Oil-free · Portable